First let me express my amazement at the number of talented people in this forum, I have been lurking and reading the tutorials for months now and learned a great deal.
I am currently working on a profile painting of a 109E and have been so off and on for nearly a year now. I have started over numerours times so far and believe that I am about to do so again with the big picture of what I need to do pretty much in focus.
However there are a question about the order in which I create features in the painting. Specifically in which order should I add the panel lines and rivets? Should this be after the shading has been completed or before?
That's correct, you need to develop a "standard operating procedure." The only way you can do that is on the fly. You could start by copying someone else's layer order but really you need to decide how you want the layers to work and what fits your style of working.
Building a layered file is a personal journey
But, to give you a direct answer, you could do the shading first, or you could do the lines first, or you could develop them simultaneously.
That's correct, you need to develop a "standard operating procedure." The only way you can do that is on the fly. You could start by copying someone else's layer order but really you need to decide how you want the layers to work and what fits your style of working.
Building a layered file is a personal journey
But, to give you a direct answer, you could do the shading first, or you could do the lines first, or you could develop them simultaneously.
So if I am interpreting what you are saying correctly, I should throw caution to the wind here and just go for it and if need be re-order the layers if needed?
Given the fact that your lines and rivets layers should be independant, it should not be a problem if you need to reorganize them.
I keep the panel lines in a group I call "blueprint", which contains the panel lines, rivets, etc. This group is above the weathering but beneath the shading and lighting. That is good for me, but is by no means the best way to do it.
Not really, think of how you want you want do do with each part. Panel lines, for instance; depending on your layer settings and how you plan to use them, they could be about or below your shading...of course depending on your shading and how you've set each layer there too.
As long as you keep things separate for maximum editability, you'll be ok.
Also, what will you need to star? You might want to do your shading using your panel lines, that detail might help decide how and where to put the shadows. You might just want to establish you main shapes, do some of the shading, add your panel lines and then finish your shading. This is more down to how you work and how you feel at the time.
I did the Zeros in a simultaneous way, building things up bit by bit. I did the Halberstadt as an all new line drawing, then shaded and added colors, and then made adjustments and corrections as I needed.
Generally I have the base colors, shading layers, weathering, and details on top of all of those. But the details that are on top of everything are transparent in one way or another so that they show, somewhat, the colors and shading under them.
One thing to keep in mind, and I know those who specialize in drawings might not agree, but the shading and markings can some times point out inaccuracies in your drawing. No drawings are perfect and if you find something just doesn't fit or look right, check the drawings and photo reference.
There were several large problems with my Halberstadt I didn't find until I put some national and personal markings on the profile.
Everything is interconnected
Hi, I am Jason Hennessey from Atlanta, GA & I'm new to this site. I am a
new comer & have just put forward my first step in the vast & fast world
of Internet & Web. I don't have much knowledge but would like to gain
& share whatever i have.
By the way I'm looking for paint shop pro brushes to download, but I
keep finding photoshop brushes instead. What websites can I go to?
I'm positively looking forward to the forum and its members, hope all will
guide, share and help me to increase my knowledge.
Hope we get to meet here, and talked about cool stuffs about our
passions and if there's any concerns you think i could answer, please d
o leave me a message.
'Till next time guys..
Hi Jason and welcome! First off, it would be better if you started your own thread for this since you really aren't responding about this one. That being said, just type "free paint shop pro brushes" into your favorite search engine. The first page alone netted these sites for me:
The last site tells you how to easily convert PS brushes to PSP ones giving you even more options! There are literally hundreds of sites offering thousands of free PSP brushes. Simmers is a great bunch of guys (except for John who is our resident grouch) that willingly offer help with whatever you're doing. Just browsing through all the entries alone will keep you busy for a month with great ideas, hints and tips. There's even a special section devoted to all you PSP guys who haven't upgraded to Photoshop yet. I'm sure you'll enjoy your visits here!
Cheers!!!
Otter (yes, that's my name)
Last edited by Otterkins2; 23rd July 2009 at 09:13.
Reason: Like I kan't spel already!
Newbie Looking for Profile Painting Direction
Re: Newbie Looking for Profile Painting Direction
Linear Mode
